General Description 

PSoC® is a scalable and reconfigurable platform architecture for a family of programmable embedded system controllers with Arm® Cortex™ CPUs (single and multi-core). The PSoC 63 product family, based on an ultra low-power 40-nm platform, is a combination of a dual-core microcontroller with low-power Flash technology and digital programmable logic, high-performance analog-to-digital and digital-to-analog conversion, low-power comparators, and standard communication and timing peripherals. The PSoC 63 family provides wireless connectivity with BLE 5.0 compliance.

Features

32-bit Dual Core CPU Subsystem

■ 150-MHz Arm Cortex-M4F CPU with single-cycle multiply

(Floating Point and Memory Protection Unit)

■ 100-MHz Cortex M0+ CPU with single-cycle multiply and MPU.

■ User-selectable core logic operation at either 1.1 V or 0.9 V

■ Inter-processor communication supported in hardware

■ 8 KB 4-way set-associative Instruction Caches for the M4 and

M0+ CPUs respectively

■ Active CPU power consumption slope with 1.1-V core operation

for the Cortex M4 is 40 µA/MHz and 20 µA/MHz for the Cortex

M0+, both at 3.3-V chip supply voltage with the internal buck

regulator

■ Active CPU power consumption slope with 0.9-V core operation

for the Cortex M4 is 22 µA/MHz and 15 µA/MHz for the Cortex

M0+, both at 3.3-V chip supply voltage with the internal buck

regulator

■ Two DMA controllers with 16 channels each

Flash Memory Sub-system

■ 1 MB Application Flash with 32-KB EEPROM area and 32-KB

Secure Flash

■ 128-bit wide Flash accesses reduce power

■ SRAM with Selectable Retention Granularity

■ 288-KB integrated SRAM

■ 32-KB retention boundaries (can retain 32 KB to 288 KB in

32-KB increments)

■ One-Time-Programmable (OTP) E-Fuse memory for validation

and security

Bluetooth Low Energy (Bluetooth Smart) BT 5.0

Subsystem

■ 2.4-GHz RF transceiver with 50- antenna drive

■ Digital PHY

■ Link Layer engine supporting master and slave modes

■ Programmable output power: up to 4 dBm

■ RX sensitivity: –95 dBm

■ RSSI: 4-dB resolution

■ 5.7 mA TX (0 dBm) and 6.7 mA RX (2 Mbps) current with 3.3-V

battery and internal SIMO Buck converter

■ Link Layer engine supports four connections simultaneously

■ Supports 2 Mbps LE data rate