Description 

The TLV9061 (single), TLV9062 (dual), and TLV9064 (quad) are single-, dual-, and quad- low-voltage (1.8 V to 5.5 V) operational amplifiers (op amps) with railto-rail input- and output-swing capabilities. These devices are highly cost-effective solutions for applications where low-voltage operation, a small footprint, and high capacitive load drive are required. Although the capacitive load drive of the TLV906x is 100 pF, the resistive open-loop output impedance makes stabilizing with higher capacitive loads simpler. These op amps are designed specifically for low-voltage operation (1.8 V to 5.5 V) with performance specifications similar to the OPAx316 and TLVx316 devices.

Features

• Rail-to-rail input and output

• Low input offset voltage: ±0.3 mV

• Unity-gain bandwidth: 10 MHz

• Low broadband noise: 10 nV/√Hz

• Low input bias current: 0.5 pA

• Low quiescent current: 538 µA

• Unity-gain stable

• Internal RFI and EMI filter

• Operational at supply voltages as low as 1.8 V

• Easier to stabilize with higher capacitive load due

to resistive open-loop output impedance

• Shutdown version: TLV906xS

• Extended temperature range: –40°C to 125°C

 Applications

• E-bikes

• Smoke detectors

• HVAC: heating, ventilating, and air conditioning

• Motor control: AC induction

• Refrigerators

• Wearable devices

• Laptop computers

• Washing machines

• Sensor signal conditioning

• Power modules

• Barcode scanners

• Active filters

• Low-side current sensing